Products

Brinol Advanced Oil0W-16

Brinol 0W16 Advanced Oil is a low-viscosity fully synthetic motor oil designed for modern petrol engines that require SAE 0W-16. It supports dependable cold-start performance, reduced friction and fuel-efficiency objectives while maintaining engine protection. The formulation is suited to applications calling for the specified low-viscosity grade and relevant manufacturer requirements.

Brinol Fuel Economy0W-20

Brinol 0W20 Fuel Economy is a fully synthetic SAE 0W-20 engine oil focused on low-friction operation and fuel-efficiency performance. It is designed for modern engines requiring a low-viscosity lubricant, while providing protection during everyday operation. Use should follow the vehicle manufacturer’s specified viscosity and applicable performance requirements. Its low-viscosity design is intended for efficient everyday operation.

Brinol Premium Oil0W-20

Brinol 0W20 Premium Oil is a fully synthetic low-viscosity motor oil developed for modern passenger-car engines. Its formulation is intended to support fuel economy, clean engine operation and reliable protection across changing temperatures. It is suitable where SAE 0W-20 is specified, with application determined by the vehicle manufacturer’s required standard.

Brinol Energi Oil0W-30

Brinol 0W30 Energi Oil is a fully synthetic motor oil formulated for modern petrol and diesel passenger vehicles requiring SAE 0W-30. Its low viscosity supports cold-start flow and fuel-efficiency objectives, while the formulation is designed to maintain engine protection during normal operating conditions. Always match the oil to the manufacturer’s required specification.

Brinol Longlife Oil0W-30

Brinol 0W30 Longlife Oil is a fully synthetic long-life motor oil designed for modern passenger vehicles. It is positioned for applications requiring SAE 0W-30 and long-drain performance, with a focus on engine cleanliness, protection and stable lubrication. Compatibility should be confirmed against the vehicle manufacturer’s specified approvals and service requirements.

Brinol Super Oil0W-40

Brinol 0W40 Super Oil is a fully synthetic high-performance motor oil designed for demanding petrol and diesel passenger-car applications. Its SAE 0W-40 grade combines low-temperature flow with higher-temperature protection, supporting stable lubrication across varied operating conditions. It is intended for vehicles whose manufacturer specifies the corresponding viscosity and performance standard.

Brinol Super Plus0W-40

Brinol 0W40 Super Plus is a fully synthetic SAE 0W-40 engine oil developed for modern passenger vehicles requiring strong protection across temperature ranges. It is formulated for stable lubrication, engine cleanliness and dependable performance under demanding conditions. Application should be based on the vehicle manufacturer’s required viscosity, specification and approval.

Brinol Truck Oil10W-30

Brinol 10W30 Truck Oil is a heavy-duty engine lubricant designed for compatible commercial and machinery applications requiring SAE 10W-30. It is intended to provide stable lubrication, protection and dependable performance across working conditions. The product should be matched to the manufacturer’s specified engine requirements, operating environment and applicable performance standards.

Brinol 4 Stroke10W-40

Brinol 10W40 4 Stroke is a semi-synthetic motorcycle engine oil formulated for compatible four-stroke engines. It is designed to support stable lubrication, engine protection and dependable operation across normal riding conditions. The product is intended for applications requiring SAE 10W-40 and should be selected according to the motorcycle manufacturer’s specified performance requirements.

Brinol Racing Cross10W-40

Brinol 10W40 Racing Cross is a motorcycle-oriented racing lubricant developed for high-performance four-stroke applications. It is designed to support stable lubrication, engine protection and dependable performance under demanding operating conditions. The product is intended for compatible motorcycle engines and should be used according to the manufacturer’s viscosity and performance requirements.

Brinol Racing Oil10W-40

Brinol 10W40 Racing Oil is a performance-oriented lubricant designed for demanding engine operation. Its formulation is intended to provide stable lubrication, protection against wear and dependable performance when engines experience elevated temperatures or operating loads. It should be selected only for applications where the specified SAE 10W-40 grade and performance requirements are appropriate.

Brinol Truck Oil10W-40

Brinol 10W40 Truck Oil is a commercial-vehicle engine lubricant designed for demanding applications requiring SAE 10W-40. It supports stable lubrication, engine protection and dependable performance under working loads and varied temperatures. Suitability depends on the engine manufacturer’s specified requirements, so the correct viscosity and performance level should always be confirmed before use.

Brinol Truck Super10W-40

Brinol 10W40 Truck Super is a heavy-duty engine oil designed for commercial vehicle applications requiring SAE 10W-40. It is intended to provide reliable lubrication, protection and stable performance during demanding service conditions. The product should be selected according to the engine manufacturer’s required viscosity, performance specification and recommended service interval.

Brinol Ultra Oil10W-40

Brinol 10W40 Ultra Oil is a semi-synthetic SAE 10W-40 engine oil intended for petrol and diesel passenger vehicles, including applications with or without turbocharging. It is designed to provide dependable lubrication, protection and stable performance in everyday operating conditions. Always confirm compatibility with the vehicle’s specified viscosity and performance requirements.

Brinol 4 Stroke10W-50

Brinol 10W50 4 Stroke is a motorcycle engine lubricant designed for compatible four-stroke applications. Its higher-viscosity formulation is intended to maintain stable lubrication and engine protection under demanding operating and temperature conditions. It should be used in motorcycles where SAE 10W-50 and the relevant performance specifications are recommended by the manufacturer.

Brinol 4 Stroke10W-60

Brinol 10W60 4 Stroke is a fully synthetic motorcycle oil designed for demanding four-stroke applications. Its formulation emphasizes high-temperature stability, low evaporation and dependable protection under heavy operating conditions. It is suitable where SAE 10W-60 is specified, with final application determined by the motorcycle manufacturer’s recommended viscosity and performance requirements.

Brinol Heavy Duty15W-40

Brinol 15W40 Heavy Duty is a mineral-based engine oil developed for compatible diesel and commercial vehicle applications. It is designed to provide stable lubrication, wear protection, corrosion resistance and dependable performance under demanding operating conditions. Use should follow the engine manufacturer’s specified SAE grade, performance requirements and recommended service practice.

Brinol Racing Cross15W-40

Brinol 15W40 Racing Cross is a performance-focused lubricant for demanding applications requiring SAE 15W-40. It is formulated to provide stable lubrication and protection under operating loads and elevated temperatures. Suitability depends on the specific engine and manufacturer requirements, so the product should be selected only where the specified viscosity and performance level are appropriate.

Brinol 4 Stroke15W-50

Brinol 15W50 4 Stroke is a fully synthetic motorcycle lubricant developed for demanding four-stroke engines and applications. It is designed to provide stable lubrication, protection against wear and dependable performance under varying operating conditions. Use should follow the motorcycle manufacturer’s recommended SAE grade and applicable performance specification for the engine.

Brinol Motorcycle Oil2 Takt

Brinol 2 Takt Motorcycle Oil is a two-stroke lubricant designed for compatible petrol-powered two-stroke engines. It is intended to provide lubrication and protection for engines operating with two-stroke fuel systems, including applications using the manufacturer’s recommended mixing method. Always follow the equipment maker’s specified oil type, ratio and operating requirements.

Brinol Ultra Oil2 Takt

Brinol 2 Takt Ultra Oil is a two-stroke motorcycle lubricant developed for compatible petrol-powered two-stroke engines. It is designed to support dependable lubrication, combustion performance and protection during normal operation. The product should be used according to the engine manufacturer’s specified two-stroke oil requirements, mixing instructions and recommended application. It is intended for compatible motorcycle applications.

Brinol 4 Stroke20W-50

Brinol 20W50 4 Stroke is a fully synthetic motorcycle engine oil designed for compatible four-stroke applications. Its higher-viscosity formulation supports stable lubrication and protection under demanding operating conditions. The product is intended for motorcycles and ATVs where SAE 20W-50 is specified, subject to the manufacturer’s required performance standards and application guidance.

Brinol Safari Cargo20W-50

Brinol 20W50 Safari Cargo is a higher-viscosity engine oil intended for compatible commercial and older vehicle applications. It is designed to support stable lubrication, protection and dependable performance under demanding conditions. The product should be used where SAE 20W-50 is specified, following the engine manufacturer’s requirements and recommended operating conditions.

Brinol Super Oil5W-20

Brinol 5W20 Super Oil is a fully synthetic SAE 5W-20 motor oil designed for modern petrol engines and applications where low viscosity is required. It supports efficient lubrication, fuel-economy objectives and reliable engine protection during everyday driving. The correct application depends on the vehicle manufacturer’s specified viscosity and performance requirements.

Brinol Energi Oil5W-30

Brinol 5W30 Energi Oil is a fully synthetic motor oil developed for modern petrol and diesel engines requiring SAE 5W-30. It focuses on efficient lubrication, stable viscosity and engine protection while supporting fuel-economy objectives. The product is intended for compatible passenger-car applications and should be selected according to the manufacturer’s required specification.

Brinol Synthetic Oil5W-30

Brinol 5W30 Synthetic Oil is a modern SAE 5W-30 engine lubricant for passenger vehicles requiring this viscosity grade. Its formulation is intended to provide stable lubrication, engine protection and dependable performance across everyday temperature and driving conditions. It can support petrol and diesel applications where the relevant manufacturer specification permits this grade.

Brinol Truck Oil5W-30

Brinol 5W30 Truck Oil is a low-viscosity engine lubricant developed for compatible heavy-duty diesel vehicles. Its formulation is positioned for modern commercial applications, supporting fuel economy, engine protection and stable lubrication while accommodating demanding operating conditions. Selection should be based on the truck manufacturer’s required SAE grade, performance specification and emissions-system compatibility.

Brinol Ultimate Oil5W-30

Brinol 5W30 Ultimate Oil is a fully synthetic SAE 5W-30 lubricant designed for modern passenger-car engines. It provides stable lubrication and protection across normal operating temperatures, with a formulation suited to applications demanding dependable everyday performance. Always verify the required viscosity, specification and approval before selecting the product for a vehicle.

Brinol Ultra Oil5W-30

Brinol 5W30 Ultra Oil is a synthetic SAE 5W-30 engine lubricant developed for modern petrol and diesel vehicles. It is designed to maintain stable lubrication, support engine cleanliness and provide protection during varied operating conditions. The product should be used only in applications where the vehicle manufacturer permits its viscosity and performance specification.

Brinol Clean Max5W-40

Brinol 5W40 Clean Max is a fully synthetic SAE 5W-40 C3 motor oil designed for modern petrol and diesel engines. Its formulation is positioned for low-SAPS applications, stable lubrication and protection of emission-control systems. It is suitable where the vehicle manufacturer specifies the relevant C3 performance level and SAE viscosity.

Brinol Top Grade5W-40

Brinol 5W40 Top Grade is a SAE 5W-40 motor oil formulated for modern petrol and diesel applications. It is designed to provide reliable lubrication, engine protection and stable performance under a broad range of operating conditions. Suitability depends on the vehicle’s required specification, viscosity grade and manufacturer recommendations. It is intended for compatible passenger-car service.

Brinol Ultra Oil5W-40

Brinol 5W40 Ultra Oil is a fully synthetic SAE 5W-40 motor oil intended for petrol and diesel passenger vehicles, including demanding applications. It supports lubrication stability, engine protection and performance across temperature changes. The product should be matched to vehicles requiring the relevant SAE grade and manufacturer-approved performance level. It is intended for compatible modern vehicle applications.

Brinol Supreme Racing5W-50

Brinol 5W50 Supreme Racing is a fully synthetic high-performance engine oil designed for demanding and high-temperature operation. Its formulation emphasizes stable viscosity, resistance to thermal stress, engine cleanliness and protection against wear, corrosion and foaming. It is intended for compatible performance applications where the manufacturer specifies an SAE 5W-50 lubricant.

Brinol Supreme Racing5W-60

Brinol 5W60 Supreme Racing is positioned as a fully synthetic high-performance racing lubricant for demanding engine operation. It is designed to maintain lubrication stability under high temperatures and heavy loads while supporting protection against wear and deposit formation. Use should follow the vehicle or engine manufacturer’s specified viscosity and performance requirements.

Brinol Gear Oil75W-140

Brinol 75W140 Gear Oil is a high-viscosity gear lubricant designed for demanding transmission and differential applications. Its formulation is intended to provide strong film strength, protection under heavy loads and stable lubrication. It should be used only where SAE 75W-140 and the required gear-oil performance specification are recommended by the manufacturer.

Brinol Gear Oil75W-80

Brinol 75W80 Gear Oil is a low-viscosity transmission lubricant designed for compatible manual gearboxes and transaxles. Its formulation is intended to support smooth operation, gear protection and stable lubrication while helping reduce friction. Use should follow the transmission manufacturer’s specified viscosity, performance standard and compatibility requirements for the application. It is intended for compatible manual transmission systems.

Brinol Gear Oil75W-90

Brinol 75W90 Gear Oil is a synthetic low-friction lubricant developed for compatible manual transmissions and gear systems. It is designed to provide stable lubrication, protection and dependable operation across changing temperatures and loads. The product should be selected according to the gearbox or differential manufacturer’s specified SAE grade and performance requirements.

Brinol Gear Oil80W-90

Brinol 80W90 Gear Oil is a mineral-based multi-purpose gear lubricant for compatible transmission and gear applications. It is designed to support stable lubrication, protection against wear and dependable operation under normal and demanding loads. Selection should follow the equipment manufacturer’s specified SAE viscosity and applicable gear-oil performance requirements. It is intended for compatible gear systems.

Brinol FluidATF 134 FE

Brinol ATF 134 FE Fluid is a fully synthetic low-viscosity automatic transmission fluid designed for compatible applications requiring the specified 134 FE performance level. It is intended to support smooth shifting, fuel-efficiency objectives, stable friction control and transmission protection. Always verify the vehicle manufacturer’s required specification before selecting the fluid.

Brinol FluidATF 6G

Brinol ATF 6G Fluid is a fully synthetic automatic transmission fluid developed for compatible six-speed automatic transmission applications. It is designed to support smooth shifting, stable friction performance and reliable protection under operating temperatures. The fluid should be used only where the transmission manufacturer specifies the relevant ATF performance and compatibility requirements.

Brinol FluidATF 8G

Brinol ATF 8G Fluid is a fully synthetic automatic transmission fluid designed for compatible modern multi-speed transmissions. Its formulation is intended to support consistent friction control, smooth shifting, thermal stability and transmission protection. The product should be selected according to the transmission manufacturer’s specified fluid requirement and compatibility standard. It is intended for compatible transmission applications.

Brinol FluidATF 9G

Brinol ATF 9G Fluid is a fully synthetic automatic transmission fluid developed for compatible modern multi-speed transmissions. It is designed to provide stable friction characteristics, smooth shifting, thermal stability and protection under operating conditions. Use should follow the transmission manufacturer’s specified ATF standard and approved application requirements. It is intended for compatible transmission systems.

Brinol FluidATF III H

Brinol ATF III H Fluid is an automatic transmission and hydraulic fluid designed for compatible applications requiring the corresponding ATF specification. It is formulated to support stable friction characteristics, transmission protection and dependable operation across temperature changes. Always verify the vehicle or equipment manufacturer’s required fluid specification before use. It is intended for compatible transmission systems.

Brinol ATF Premium 1 PlusATF 1+

Brinol ATF Premium 1 Plus is a multi-vehicle automatic transmission fluid designed for a broad range of compatible transmission applications. Its formulation is intended to provide stable friction behavior, smooth shifting, protection and reliable performance across operating temperatures. Application should always be confirmed against the transmission manufacturer’s specified fluid requirements.

Brinol FluidATF VI

Brinol ATF VI Fluid is a fully synthetic high-grade automatic transmission fluid designed for compatible modern transmission systems. It is intended to provide stable friction characteristics, smooth shifting and protection across changing operating temperatures. Application should be confirmed against the vehicle manufacturer’s specified ATF standard, transmission requirements and approved fluid compatibility.

Brinol Hydraulic FluidCHF

Brinol CHF Hydraulic Fluid is a high-quality hydraulic and servo fluid designed for compatible power-steering and central-hydraulic systems. It is intended to support stable hydraulic performance, lubrication and protection across operating temperatures. The product should be selected only where the vehicle or equipment manufacturer specifies a compatible CHF-type hydraulic or steering fluid.

BrinolDiesel Injector Cleaner

Brinol Diesel Injector Cleaner is a fuel-system additive designed to clean deposits from compatible diesel injectors and support improved combustion. The catalogue describes benefits including cleaner injectors, improved combustion, cetane support, reduced smoke and smoother engine operation. It should be used according to the product instructions and compatible vehicle requirements.

Brinol Brake FluidDOT 4

Brinol DOT 4 Brake Fluid is a synthetic brake fluid designed for compatible hydraulic braking systems requiring DOT 4 performance. It is formulated to provide a high boiling point and protection against corrosion, supporting reliable brake-system operation. Always use the brake-fluid specification specified by the vehicle manufacturer and follow the recommended replacement procedure.

BrinolDPF Cleaner Premium

Brinol DPF Cleaner Premium is an additive designed to support cleaning and regeneration of compatible diesel particulate filters. It is intended to help address soot accumulation and support cleaner exhaust-system operation, while assisting DPF regeneration. Application should follow the product instructions and vehicle manufacturer’s requirements, particularly for compatible diesel systems.

Brinol Gear OilDSG

Brinol DSG Gear Oil is a high-performance transmission fluid designed for compatible dual-clutch and DSG-type applications. It is intended to support smooth shifting, friction control, thermal stability and protection of transmission components. The product should be used only where the vehicle or transmission manufacturer specifies a compatible DSG or DCT fluid.

BrinolEngine Flush Treatment

Brinol Engine Flush Treatment is an additive designed to clean and flush deposits from compatible engine lubrication systems before an oil change. It helps remove sludge, varnish and other contaminants so fresh oil can operate in a cleaner system. Use should follow the product instructions and the engine manufacturer’s recommended maintenance procedure.

Brinol AntifreezeG11

Brinol G11 Antifreeze is a coolant and antifreeze solution designed to protect compatible engine cooling systems against freezing, corrosion and overheating. It is offered as a ready-mixed or concentrated formulation according to the catalogue. Application should follow the vehicle manufacturer’s specified coolant type, dilution requirements and recommended service procedure. It is intended for compatible cooling systems.

Brinol AntifreezeG12

Brinol G12 Antifreeze is a coolant and antifreeze formulation designed for compatible engine cooling systems. It supports protection against corrosion, overheating and freezing while maintaining cooling-system performance. The catalogue identifies ready-mixed and concentrated formats. Use should follow the vehicle manufacturer’s specified coolant standard, dilution instructions and service requirements. It is intended for compatible cooling systems.

Brinol AntifreezeG13

Brinol G13 Antifreeze is a coolant and antifreeze formulation designed to protect compatible engine cooling systems against corrosion, overheating and freezing. It is available in ready-mixed or concentrated form according to the catalogue. The correct coolant specification and dilution should always be confirmed against the vehicle manufacturer’s requirements before use.

Brinol HydroISO 32

Brinol Hydro ISO 32 is a high-quality hydraulic oil designed for compatible industrial, agricultural and machinery hydraulic systems. Its lower ISO viscosity grade supports fluid flow and dependable hydraulic operation while providing lubrication and protection. Application should be based on the equipment manufacturer’s specified viscosity, operating conditions and hydraulic-fluid requirements.

Brinol HydroISO 46

Brinol Hydro ISO 46 is a multi-grade hydraulic oil developed for compatible heavily loaded hydraulic systems. It is intended to provide stable lubrication, wear protection and reliable hydraulic performance across operating conditions. The product is suitable for applications requiring ISO VG 46, subject to the machinery manufacturer’s specifications and operating recommendations.

Brinol HydroISO 100

Brinol ISO Hydro 100 is a high-performance fluid for compatible heavy-duty hydraulic and industrial applications requiring a higher viscosity grade. It is designed to provide stable lubrication and protection under demanding operating conditions. The product should be selected according to the equipment manufacturer’s specified ISO VG 100 requirement and applicable hydraulic-fluid standard.

Brinol HydroISO 68

Brinol ISO Hydro 68 is a high-quality hydraulic oil developed for demanding hydraulic systems operating under substantial loads. Its formulation is intended to provide stable lubrication, wear protection and dependable hydraulic performance across temperature changes. It should be used in machinery where ISO VG 68 and the relevant hydraulic-fluid specification are recommended.

Brinol GreaseLithoplex EP3

Brinol Lithoplex EP3 Grease is a lithium-complex grease with extreme-pressure additives, formulated to NLGI 3 consistency. It is intended for demanding lubrication applications where higher mechanical stability and load-carrying performance are required. Use should be based on the equipment manufacturer’s specified grease type, consistency, operating temperature and service conditions. It is intended for compatible heavy-duty lubrication points.

Brinol GreaseLithoplex HV2

Brinol Lithoplex HV2 Grease is a lithium-complex high-viscosity grease with EP additives and NLGI 2 consistency. It is designed for compatible applications requiring durable lubrication, load protection and stable performance. Selection should follow the machinery manufacturer’s specified grease type and consistency, particularly where high-viscosity lubrication is required. It is intended for compatible high-load lubrication applications.

Brinol GreaseLithos 2

Brinol Lithos 2 Grease is a lithium-based grease formulated to NLGI 2 consistency. It is designed for general lubrication of compatible automotive, industrial and mechanical components where a lithium grease is specified. The product supports dependable lubrication and protection, with application determined by the equipment manufacturer’s load, temperature and service requirements.

Brinol TransmissionMBX 15

Brinol MBX 15 Transmission is a high-quality automatic gearbox oil designed for compatible transmission applications. It is formulated to provide dependable lubrication, stable friction behavior and protection during normal transmission operation. Use should follow the transmission manufacturer’s specified fluid standard and compatibility requirements, particularly for applications calling for the relevant MB specification.

BrinolMotor Oil Treatment

Brinol Motor Oil Treatment is an engine-oil additive designed to enhance the performance characteristics of compatible lubricants. The catalogue positions it around improved oil properties, engine protection and reduced friction-related effects. It should be added only as directed, using the recommended quantity and confirming compatibility with the engine and lubricant.

BrinolOctane Booster

Brinol Octane Booster is a petrol-fuel additive designed to increase octane performance in compatible gasoline applications. The catalogue describes benefits including improved combustion, smoother operation, restored performance and reduced knock-related effects. It should be used according to the recommended dosage and only in fuel systems where the product is appropriate.

BrinolOil Stop Leak

Brinol Oil Stop Leak is an additive designed to help reduce or prevent oil leakage through compatible seals and gaskets. The catalogue describes support for reducing oil loss and helping restore seal performance. It should be used according to the stated dosage and application instructions, while significant leaks should be mechanically inspected.

BrinolOil Stop Smoke

Brinol Oil Stop Smoke is an additive designed to help reduce excessive exhaust smoke associated with oil burning in compatible engines. The catalogue describes support for reducing oil consumption, improving compression and maintaining oil viscosity. Use should follow the product instructions, with underlying mechanical causes of excessive smoke investigated separately.

BrinolPetrol Injector Cleaner

Brinol Petrol Injector Cleaner is a fuel-system additive designed to clean compatible petrol injectors, valves and combustion-related deposits. The catalogue describes benefits including cleaner fuel-system components, improved combustion, smoother operation and reduced deposit-related effects. It should be used according to the product instructions and only in compatible petrol applications. It is intended for compatible petrol vehicles.

BrinolValve Cleaner

Brinol Valve Cleaner is an automotive additive designed to help clean compatible valves and combustion-system deposits. The catalogue positions it around cleaner combustion, reduced smoke and improved engine operation. It should be used according to the recommended dosage and application instructions, with vehicle compatibility confirmed before treatment. It is intended for compatible petrol applications.

68 products